Effect of the Addition of Sikacrete-W and Viscocrete-3115n on the Compressive Strength of Concrete in Waterlogged Bore Pile Casting Work
DOI:
https://doi.org/10.55324/josr.v4i7.2693Keywords:
Sikacrete-W, Viscocrete-3115N, Kuat Tekan BetonAbstract
This study examines the effect of the addition of Sikacrete-W and Viscocrete-3115N additives on the compressive strength of concrete in waterlogged bore pile casting work. Concrete is an important construction material, but underground casting can lead to washout and segregation, which negatively impacts concrete quality. In this study, variations of Sikacrete-W addition of 3%, 5%, and 10% and 0.6% Viscocrete-3115N were used to improve the cohesion and viscosity of the mixture. The test results showed that the average compressive strength of concrete with the addition of additives was lower than that of normal concrete, with the largest decrease occurring in the 10% Sikacrete-W mixture. Meanwhile, a 5% Sikacrete-W mixture yielded an optimal compressive strength of 31.74 MPa, suggesting that the addition of additives could affect the characteristics of concrete under special conditions.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Abun Bunjamin, Ayu Ningrum Pertiwi, Elpan Yudiana, Muhammad Makkih
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC-BY-SA). that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
